Media Summary: Microwire 93C86 and 24LC04 EEPROM from Samsung Toner. Scrape the CLK and DAT0 pads carefully (expose the copper), Use flux and apply solder to the pads first. Use pin header and ... Added function of unlock instead of script in earlier version. (1.15). 1 wire BDM for 16 bit MC chip. The same protocol to

U Link Nt Program Atmega - Detailed Analysis & Overview

Microwire 93C86 and 24LC04 EEPROM from Samsung Toner. Scrape the CLK and DAT0 pads carefully (expose the copper), Use flux and apply solder to the pads first. Use pin header and ... Added function of unlock instead of script in earlier version. (1.15). 1 wire BDM for 16 bit MC chip. The same protocol to Dev board TRK-USB-MPC5602P has a JTAG port. Then there is a easiest way to make connection to JTAG pin finder. Try to avoid reset pin to be connected since it will not detect the pins properly. Make connection, power on the ...

Photo Gallery

u-Link NT program Atmega chip
u-Link NT 1.30 program Birware and Alphaware on SB6190
u-Link NT Program ST20 (ExtreamView3300)
u-Link NT program EEPROM.
How to connect u-Link NT to TM1602 with emmc
u-Link NT introduction.
u-Link NT program MC9S12X128 flash
u-Link NT program MPC5602P(SPC5602P)
Easiest 16 pin SPI connection with u-Link NT. (No soldering)
u-Link NT to scan JTAG pinout.
u-Link NT program TM-802G modem.
u-link NT and USB BDM NT program DCT2224 (MC68332)
View Detailed Profile
u-Link NT program Atmega chip

u-Link NT program Atmega chip

u

u-Link NT 1.30 program Birware and Alphaware on SB6190

u-Link NT 1.30 program Birware and Alphaware on SB6190

Software

u-Link NT Program ST20 (ExtreamView3300)

u-Link NT Program ST20 (ExtreamView3300)

The read speed is very fast. The

u-Link NT program EEPROM.

u-Link NT program EEPROM.

Microwire 93C86 and 24LC04 EEPROM from Samsung Toner.

How to connect u-Link NT to TM1602 with emmc

How to connect u-Link NT to TM1602 with emmc

Scrape the CLK and DAT0 pads carefully (expose the copper), Use flux and apply solder to the pads first. Use pin header and ...

u-Link NT introduction.

u-Link NT introduction.

Introducing

u-Link NT program MC9S12X128 flash

u-Link NT program MC9S12X128 flash

Added function of unlock instead of script in earlier version. (1.15). 1 wire BDM for 16 bit MC chip. The same protocol to

u-Link NT program MPC5602P(SPC5602P)

u-Link NT program MPC5602P(SPC5602P)

Dev board TRK-USB-MPC5602P has a JTAG port.

Easiest 16 pin SPI connection with u-Link NT. (No soldering)

Easiest 16 pin SPI connection with u-Link NT. (No soldering)

Then there is a easiest way to make connection to

u-Link NT to scan JTAG pinout.

u-Link NT to scan JTAG pinout.

JTAG pin finder. Try to avoid reset pin to be connected since it will not detect the pins properly. Make connection, power on the ...

u-Link NT program TM-802G modem.

u-Link NT program TM-802G modem.

I tried the same setup to USB JTAG

u-link NT and USB BDM NT program DCT2224 (MC68332)

u-link NT and USB BDM NT program DCT2224 (MC68332)

u

u-Link NT Program SD card (Prototype)

u-Link NT Program SD card (Prototype)

The plan is to use