Media Summary: Scrape the CLK and DAT0 pads carefully (expose the copper), Use flux and apply solder to the pads first. Use pin header and ... [Update]2021.04.18 I found using 3.3v direct from This is TQ2440, a S3C2440 dev board. It has both NAND and Nor flash. My earlier video shows how to
U Link Nt Program Tm - Detailed Analysis & Overview
Scrape the CLK and DAT0 pads carefully (expose the copper), Use flux and apply solder to the pads first. Use pin header and ... [Update]2021.04.18 I found using 3.3v direct from This is TQ2440, a S3C2440 dev board. It has both NAND and Nor flash. My earlier video shows how to Dev board TRK-USB-MPC5602P has a JTAG port. SB5102 uses SPI flash. The ISP pin (pin 9) needs to pull high. Regular 120V power applies. One side cable to solder to the J303. JTAG pin finder. Try to avoid reset pin to be connected since it will not detect the pins properly. Make connection, power on the ...
