Media Summary: Software version 1.30 added a command "fdisk". This is an example of the output Device Start Size Id Type 1.img 2a0000 300000 ... Master CPU, 2M flash, MPC565, Slave CPU 9S12C32 32KB flash. Both can be programmed with This is TQ2440, a S3C2440 dev board. It has both NAND and Nor flash. My earlier video shows how to

U Link Nt To Program - Detailed Analysis & Overview

Software version 1.30 added a command "fdisk". This is an example of the output Device Start Size Id Type 1.img 2a0000 300000 ... Master CPU, 2M flash, MPC565, Slave CPU 9S12C32 32KB flash. Both can be programmed with This is TQ2440, a S3C2440 dev board. It has both NAND and Nor flash. My earlier video shows how to The cheap BDM Frame from aliexpress does work but the pins are Added function of unlock instead of script in earlier version. (1.15). 1 wire BDM for 16 bit MC chip. The same protocol to Microwire 93C86 and 24LC04 EEPROM from Samsung Toner.

Photo Gallery

u-Link NT 1.30 program Birware and Alphaware on SB6190
u-Link NT to program MPC565 ECU (Chrysler)
u-Link NT program ECU E67 Master CPU (MPC565) and slave CPU.
u-Link NT program three RFHUBS (9S123EG384)
u-Link NT and USB BDM NT program ECU 411
u-Link NT program RFHUB over can bus.
u-Link NT Program Nand flash on S3C2440 via JTAG port.
Connect u-Link NT to SB5101 modem safely.
BDM frame with u-Link NT (E411 programming)
u-Link NT program MC9S12X128 flash
u-Link NT program SAAB ECU (BDM)
USB BDM NT, USB JTAG NT,u-Link NT,u-Link NAND explained.
View Detailed Profile
u-Link NT 1.30 program Birware and Alphaware on SB6190

u-Link NT 1.30 program Birware and Alphaware on SB6190

Software version 1.30 added a command "fdisk". This is an example of the output Device Start Size Id Type 1.img 2a0000 300000 ...

u-Link NT to program MPC565 ECU (Chrysler)

u-Link NT to program MPC565 ECU (Chrysler)

MPC565 has internal 1M flash. USB JTAG

u-Link NT program ECU E67 Master CPU (MPC565) and slave CPU.

u-Link NT program ECU E67 Master CPU (MPC565) and slave CPU.

Master CPU, 2M flash, MPC565, Slave CPU 9S12C32 32KB flash. Both can be programmed with

u-Link NT program three RFHUBS (9S123EG384)

u-Link NT program three RFHUBS (9S123EG384)

Software 1.64 can also

u-Link NT and USB BDM NT program ECU 411

u-Link NT and USB BDM NT program ECU 411

u

u-Link NT program RFHUB over can bus.

u-Link NT program RFHUB over can bus.

More will be supported in the future.

u-Link NT Program Nand flash on S3C2440 via JTAG port.

u-Link NT Program Nand flash on S3C2440 via JTAG port.

This is TQ2440, a S3C2440 dev board. It has both NAND and Nor flash. My earlier video shows how to

Connect u-Link NT to SB5101 modem safely.

Connect u-Link NT to SB5101 modem safely.

Safety tips. 1. Beginner do

BDM frame with u-Link NT (E411 programming)

BDM frame with u-Link NT (E411 programming)

The cheap BDM Frame from aliexpress does work but the pins are

u-Link NT program MC9S12X128 flash

u-Link NT program MC9S12X128 flash

Added function of unlock instead of script in earlier version. (1.15). 1 wire BDM for 16 bit MC chip. The same protocol to

u-Link NT program SAAB ECU (BDM)

u-Link NT program SAAB ECU (BDM)

This video shows how to

USB BDM NT, USB JTAG NT,u-Link NT,u-Link NAND explained.

USB BDM NT, USB JTAG NT,u-Link NT,u-Link NAND explained.

USB BDM

u-Link NT program EEPROM.

u-Link NT program EEPROM.

Microwire 93C86 and 24LC04 EEPROM from Samsung Toner.