Scrapbot Printnc Cutting Out V3

Media Summary: First Aluminium Cuts on PrintNC (ScrapBot) scrapbot (printNC) pushed to limit, 10mm DOC 0.3mm step over with 400w Spindle. This is the first in a series of videos chronicling my new

Scrapbot Printnc Cutting Out V3 - Detailed Analysis & Overview

First Aluminium Cuts on PrintNC (ScrapBot) scrapbot (printNC) pushed to limit, 10mm DOC 0.3mm step over with 400w Spindle. This is the first in a series of videos chronicling my new 6mm single flute upcut carbide endmill, 22k RPM spindle speed. Today we'll install the wasteboard, a dustshoe and You can follow along this amazing build on Lee's Instagram here The

Photo Gallery

scrapbot (printNC) cutting out V3 z Axis

First Aluminium Cuts on PrintNC (ScrapBot)

scrapbot (printNC) pushed to limit, 10mm DOC 0.3mm step over with 400w Spindle.

PrintNC - Electronics & First Cuts | part 2

PrintNC V3 Z-axis in Solidworks

PrintNC Project Part 1: Parts and a little planning

Part 1: PrintNC CNC Upgrades - Machining steel with wood and plastic parts cnc machine.

PrintNC 4m/min, 5mm stepover cutting a topography in 3/4" plywood pt 2

Z-Independent Dust Collector for PrintNC V3 z-gantry

PrintNC - Wasteboard, Dustshoe & First Project | part 3

PrintNC Assembly Walkthrough

PrintNC - Open Source High Peformance

View Detailed Profile

scrapbot (printNC) cutting out V3 z Axis

scrapbot (printNC) cutting out V3 z Axis

scrapbot (printNC) cutting out V3 z Axis

First Aluminium Cuts on PrintNC (ScrapBot)

First Aluminium Cuts on PrintNC (ScrapBot)

First Aluminium Cuts on PrintNC (ScrapBot)

scrapbot (printNC) pushed to limit, 10mm DOC 0.3mm step over with 400w Spindle.

scrapbot (printNC) pushed to limit, 10mm DOC 0.3mm step over with 400w Spindle.

scrapbot (printNC) pushed to limit, 10mm DOC 0.3mm step over with 400w Spindle.

PrintNC - Electronics & First Cuts | part 2

PrintNC - Electronics & First Cuts | part 2

Today we will wire up the

PrintNC V3 Z-axis in Solidworks

PrintNC V3 Z-axis in Solidworks

I'm gonna build a

PrintNC Project Part 1: Parts and a little planning

PrintNC Project Part 1: Parts and a little planning

This is the first in a series of videos chronicling my new

Part 1: PrintNC CNC Upgrades - Machining steel with wood and plastic parts cnc machine.

Part 1: PrintNC CNC Upgrades - Machining steel with wood and plastic parts cnc machine.

In this video, see the

PrintNC 4m/min, 5mm stepover cutting a topography in 3/4" plywood pt 2

PrintNC 4m/min, 5mm stepover cutting a topography in 3/4" plywood pt 2

6mm single flute upcut carbide endmill, 22k RPM spindle speed.

Z-Independent Dust Collector for PrintNC V3 z-gantry

Z-Independent Dust Collector for PrintNC V3 z-gantry

see: https://www.thingiverse.com/thing:5435298.

PrintNC - Wasteboard, Dustshoe & First Project | part 3

PrintNC - Wasteboard, Dustshoe & First Project | part 3

Today we'll install the wasteboard, a dustshoe and

PrintNC Assembly Walkthrough

PrintNC Assembly Walkthrough

PrintNC

PrintNC - Open Source High Peformance

PrintNC - Open Source High Peformance

You can follow along this amazing build on Lee's Instagram here https://www.instagram.com/ljsengineering The

First cut on PrintNC

First cut on PrintNC

First cut on PrintNC