Media Summary: A demonstration on how to use the sweep tool to create a cut. In this step a second rotating axle is added and an 8-tooth gear is place on the new axel and positioned such that is meshes with ... A demonstration on how to use a helical sweep to create a representation of a screw thread.
Pro E Tutorial 16 Tcnj - Detailed Analysis & Overview
A demonstration on how to use the sweep tool to create a cut. In this step a second rotating axle is added and an 8-tooth gear is place on the new axel and positioned such that is meshes with ... A demonstration on how to use a helical sweep to create a representation of a screw thread. In this step an axle is added to the assembly. The axle is placed using the Pin constraint set that provides a means to locate the ... In this step the assembly is switched to mechanism application and a gear-pair relationship is created between the 24-tooth and ... In this fifth step a 24 tooth gear is added to the axle that can rotate using the pin constraint. The gear is -fully- constrained with ...
In this step a third item is added to the assembly. The constraints are placed by accessing the placement tab. The part is fully ... Simple Extrusion with three features created with the extrude tool. Steps on how to bring the initial part into an assembly and fully constrain it with respect to the assembly coordinate system. Creation of a part that requires the use of reference geometry. datum planes are created by both selecting two edges and by ... This video shows the creation of a part that requires the use of sketches that must be created on a set of orthogonal planes. A short video demonstrating how to utilize the sweep function.
