Linuxcnc Mesa 7i43 Initial Testing

Media Summary: I was inspired by Dr. D-Flo's channel to try and build my own CNC mill. This is just a quick and very dirty video showing the servos ... attached the x-axis, seems to actually work. Give Skillshare a try: µm resolution linear encoder

Linuxcnc Mesa 7i43 Initial Testing - Detailed Analysis & Overview

I was inspired by Dr. D-Flo's channel to try and build my own CNC mill. This is just a quick and very dirty video showing the servos ... attached the x-axis, seems to actually work. Give Skillshare a try: µm resolution linear encoder

Photo Gallery

LinuxCNC MESA 7i43 initial testing

First move with mesa 7i43 board.

Initial homing with LinuxCNC + Mesa FPGA controller

MPG, first test

LinuxCNC MESA 7I76e initial benchtest with DMM Servos and DYN4 drives

Linuxcnc Mesa stepper test

Mesa 7i73 LinuxCNC remote panel test

LinuxCNC - testing physical cycle start, feed hold and single block buttons

Quick update + mesa and linuxcnc random thoughts

LinuxCNC with realtime ethernet - first test

another rube goldberg linuxcnc setup

Linuxcnc first steps with mesa 7i96s

View Detailed Profile

LinuxCNC MESA 7i43 initial testing

LinuxCNC MESA 7i43 initial testing

Testing

First move with mesa 7i43 board.

First move with mesa 7i43 board.

1920p/mm ~128000pps.

Initial homing with LinuxCNC + Mesa FPGA controller

Initial homing with LinuxCNC + Mesa FPGA controller

This is one of the very

MPG, first test

MPG, first test

First test

LinuxCNC MESA 7I76e initial benchtest with DMM Servos and DYN4 drives

LinuxCNC MESA 7I76e initial benchtest with DMM Servos and DYN4 drives

I was inspired by Dr. D-Flo's channel to try and build my own CNC mill. This is just a quick and very dirty video showing the servos ...

Linuxcnc Mesa stepper test

Linuxcnc Mesa stepper test

Testing Mesa

Mesa 7i73 LinuxCNC remote panel test

Mesa 7i73 LinuxCNC remote panel test

Mesa

LinuxCNC - testing physical cycle start, feed hold and single block buttons

LinuxCNC - testing physical cycle start, feed hold and single block buttons

testing

Quick update + mesa and linuxcnc random thoughts

Quick update + mesa and linuxcnc random thoughts

So it reads all the inputs from the

LinuxCNC with realtime ethernet - first test

LinuxCNC with realtime ethernet - first test

First

another rube goldberg linuxcnc setup

another rube goldberg linuxcnc setup

taking the step/dir out of mach to a

Linuxcnc first steps with mesa 7i96s

Linuxcnc first steps with mesa 7i96s

attached the x-axis, seems to actually work.

CNC Motion Control with LinuxCNC + Mesa FPGA Card

CNC Motion Control with LinuxCNC + Mesa FPGA Card

Give Skillshare a try: https://skl.sh/marcoreps9 µm resolution linear encoder https://www.banggood.com/custlink/mGDRgknNpM ...