Media Summary: At first, I have the jumper connected on JP1 to use a single power to power both the servos and the Demonstration of the altitude hold function of the new Consider supporting the channel by visiting www.patreon.com/painless360 See my playlist for all the videos in the series ...
Ardupilot Mega 2 Apm 2 - Detailed Analysis & Overview
At first, I have the jumper connected on JP1 to use a single power to power both the servos and the Demonstration of the altitude hold function of the new Consider supporting the channel by visiting www.patreon.com/painless360 See my playlist for all the videos in the series ... First Loiter Mode test in windy weather. Due to the fact that I´m using standard configuration and the nasty weather, I´m quite ... Too late to go out, but couldn't resist! The space is pretty tight, about a foot spare left and right, and two feet fore and aft. After suffering a multitude of crashes it was decided that the original ArduCessna needed a re-fit. So here is ArduCessna
A very quick and simple guide on how to build and add external GPS and ARMED LED's to your Ardupilot Mega 2.0 unboxing APM 2.0 unboxing Loiter Test with Ardupilot Mega 2 GPS Hold Hovering Test A bit of wobbling but after some time autotune works out this issue. A quick look at my APM2 before I put it back in the plane. No editing or anything in the video so please excuse any waffling on.
